Metal Working Machines

Posts Tagged ‘Brake’

Dave’s Cheap Sheet Metal Bending Brake www.ch601.org Test bending 1.1mm thickness metal

www.teranmachinery.com and http VERSON Obi Press Type: 150-08G S/N: 25239 Years: 1976 Capacity: 150 Ton Table: 35-1/2″ x 27-1/2″ 60-spm air clutch plam switch light curtain SSC-1000 Part Revolution control Visit our page for a wide variety of Used METAL WORKING MACHINERY www.teranmachinery.com and http

www.teranmachinery.com and http CINCINNATI Cincinnati Press Brake Capacity: 18′ X 225 Ton Model: Series 9 S/N: 38454 Year: 1972 Bending Capacities: 3/8″ X 10′, 1/4″ X 14′, 3/16″ X 18′ Tonnage Bottom Capacity: 225 ton Midstroke Capacity:150 Ton Ton Overall Length of Bed & Ram: 18′ Distance Between Housings: 150″ Stroke: 3″ Ram Adjustment: 7″ Shut Height: 14″ Throat Depth: 8″ Width of Bed: 3″ SPM: 30 Country of Origin: USA Equipped With : 18′Die-Holder Machine Weight : 15500Kg. Machine Dimensions : 80¨x 120¨x 222″ General Terán, NL. México Visit our page for a wide variety of used METAL WORKING MACHINERY www.teranmachinery.com and http

www.teranmachinery.com and http PACIFIC Type: Press Brake Hidraulic Capacity: 8′ x 60ton Model: NA S/N: 2582 Year: NA Bending Capacities: 14GA Tonnage Bottom Capacity: 60Ton Midstroke Capacity: 40 Ton Stroke: 16″ Overall Length of Bed & Ram: 8′ Distance Between Housings: 75-3/4″ Ram Adjustment: 16″ Shut Height: 10-1/2″ Throat Depth: 5″ Width of Bed: 1-1/2″ SPM: 6 Country of Origin: USA EQUIPPED WITH: NA Machine Weight: NA Machine Dimensions: 105″ x 53″ x 87″ Visit our page for a wide variety of used METAL WORKING MACHINERY www.teranmachinery.com and http

www.teranmachinery.com and http CHICAGO Type: Press Brake Capacity: 12′ x 90ton Model: ND S/N: L-20986 Year: NA Bending Capacities: NA Tonnage Bottom Capacity: 90Ton Midstroke Capacity:NA Stroke: NA Overall Length of Bed & Ram: 12′ Distance Between Housings: 126″ Ram Adjustment: 5″ Shut Height: 8″ Throat Depth: 8 1/2″ Width of Bed: NA SPM: NA Country of Origin: USA EQUIPPED WITH: NA Machine Weight: 16315Lbs. Machine Dimensions: 150″ x 162″ x 96″ Visit our page for a wide variety of Used METAL WORKING MACHINERY www.teranmachinery.com and http

Product Description
Three Machines In One This CRL Metal Brake and Shear was designed by a glazier to be portable for use in the shop or on the jobsite. It has a 14 inch (355.6 millimeter) deep throat and is able to handle up to .070 inch (1.85 millimeter) thick metal. The brake edge of the machine is capped with stainless steel to allow a utility knife to be run down it to score the metal when using the machine as a shear. A silicone-lined bending bar prevents damage to the finish. The machine’s clamping action also allows it to make hemmed edges. Short pieces can be bent by one person; long pieces require two people. The machine is manually operated and has no power assist features. Metal must be scribed before bending. This is easily done with a utility knife after the metal has been positioned in the bender. For questions about this product please contact us at .

C.R. LAURENCE BSV1V CRL VHS Break & Shear Video Tape

Press Brake, Shear, Plasma, Lazer cutting machine Processing center, High precision manufacturing up to 28 meter on a single operation

Product Description
-Bends materials up to 14 gauge steel
-Makes up to 90 degree bends
-Angle 45 degrees
-Bends materials up to 36″ Wide
-Designed for Bench Top Mounting
-Make adjustments quickly using a protractor

36 Inch Sheet Metal Bending Brake Bender 30

Raphael Ibarra
2327 Haldane Houston TX, 77055
Home:(832) 274-5231
eaglepasstexan@yahoo.com

Objective: seeking a position in the Houston area were I can utilize my skills and possibly learn a new trade

Education: G.E.D / 1998
SPECIAL SKILLS :

Liquor/Bartender certificate obtained 03/09
Forklift Certified
Overhead Crane
Saw Operator
Blueprints
Deburr
Shipping Receiving
Computers
Billingual
General Labor

Dyna Drill Technologies Houston, Tx
Debur/saw/overhead crane/forklift 08/08 to 02/09

Debur all sorts of metal to their specifications
Ran saw to cut raw material to their size
Used all sorts of tools for the job
Met deadlines and followed stricken directions
Used forklift to transfer raw parts and to help around the warehouse
Used overhead crane to set parts on rollers

DewalchTechnologies Houston, Tx
Maintenance Helper 10/07 to 08/08

Assist in tearing down and diagnosing problems
General knowledge of 30 ton press and cnc
Machinery problems.
Job duty of maintaining air compressors and all machinery properly oiled and lubricated
Extensive forklift use
Use of a verity of tools
Use of ladders

All American RiggingHouston, TX
Truck Driver/ Rigger04/07 to 10/07

Deliver high dollar machines to companies
Extensive driving, wide, and oversize loads
Special routs throughout the U.S.A in some cases

Tipton TruckingHouston, TX
Truck Driver (oilfields)02/04 to 04/07

Delivered subs, pony, collars, and mud motors throughout the U.S.
Responded to dispatch requests
Used forklift to transfer merchandise as necessary

Hot wheels TruckingHouston, TX
Truck Driver (oilfields)08/03 to 02/04

Delivered all types of equipment to oil rigs in the state of Texas
Worked at steady pace in relation to given deadlines
Unloaded materials with forklift

Swift TransportationMemphis, TN
Truck Driver07/03 to 08/03

Conducted delivery training on the job while traveling throughout the country
Monitored Qualicomm communicator and relayed route information

Brake CheckHouston, TX
Technician02/97 to 07/03

Repaired all types of car brake and undercarriage systems
Stocked merchandise and conducted inventory checks